An authorized GoPro dealer

             DESCRIPTION

(these products are also located in their categories below this section)

**NEW   NEW   NEW   NEW   NEW   NEW**

Wrist floater: This is a foam wrist floater that is strong enough to hold the camera and suction cup.  Easy to attach to the wrist.  Has an adjustment for sizing.

 **NEW   NEW   NEW   NEW   NEW   NEW**

PROFESSIONAL Flat Lens Housing:  Due to numerous requests from professional divers, we have a new PROFESSIONAL flat lens housing.  Identical to the standard flat lens housing we sell, except we take extra care in making these.  EACH and every professional flat lens housing is pressure tested at 200 feet (61 meters) for 1 hour.   We've added a rubber ring around lens for added protection.
                   Flat lens housing page

Note: the GoPro housing itself is rated at 180 feet (60 meters), so 200 feet is right on the fringe for this GoPro housing.

 **NEW   NEW   NEW   NEW   NEW   NEW**

Reverse GoPro adapter: We've been wanting this one for a long time, so we finally made one ourselves.  It allows you to use a non-GoPro camera or device on a GoPro mount.  Use with your GoPro pivot arms to extend away from the mounting point and get different angles.  How cool is that! 

You can use a GPS, camera, articulated arm, binoculars, 2-way radio, basically anything that has a standard 1/4"-20 bolt (which is 99% of tripod holes out there). Keep in mind, GoPro mounts are designed for a 6 oz. camera so don't go heavier than that in extreme environments or your GoPro mount might break.

This adapter is machined out of solid aluminum. Comes with a removable 1/4-20 bolt to make it a male or female adapter.  Also available in a high-quality Delrin plastic adapter for non-corrosion uses. This mount is an Eye Of Mine exclusive.       
                             Aluminum adapter (unpainted):

Available Sept. 10th
Delrin Plastic adapter (black):

Note: Gopro quick release and thumbscrew not included as pictured
.

 **NEW   NEW   NEW   NEW   NEW   NEW**

Paddle Mount: This mount was originally made for the Discovery Channel for the top fin of a shark, but it could be use for something else. You can very quickly attach and detach in a fraction of a second if needed. It works similar to a vice grip, except there is no adjustment nob. Whatever you squeeze this onto, it will stay locked tight until a lever is pushed.

The paddles are covered with non-stick material (looks like painted sandpaper) for maximum grip. This mount is very front heavy, so you must have a very strong hold on the subject and the subject must be stable or else the mount will rotate off. Can be used vertically or horizontally. Could be used with other lightweight cameras.  Watch video from Shark Week Hosts. Includes tripod adapter.

Overall length from end of paddles to camera: 11" (280mm)
Maximum paddle opening: 2-3/4" (70mm)

This is an Eye Of Mine exclusive.

HD HERO HIGH  DEFINITION  CAMERAS

CHDNH-001K

** temporarily out of stock **

GoPro HD HERO NAKED Kit.  Don't worry, you can use this camera with your cloths on.  Naked means it comes with no mounts except one curved helmet mount.  This is the world’s only wearable 1080p HD on-board video and still photo camera.  3 HD modes: 1080p, 720p and 960p some with 60 frames per second slow motion option.  Also a 4th wide DVD resolution mode. 

Included is one mount for attaching the camera to a helmet or other curved surface as well as the quick-release HD housing which protects the camera.

What's Included:

• 1 HD HERO Camera (5 megapixel)
• 1 Rechargeable 1100 mAh Lithium-Ion Battery
• 1 Waterproof Quick-Release Housing (180’/60 m)
• 1 Curved, 3M™ Adhesive Mount
• 1 Quick-Release Buckle
• 1 USB Cable
• 1 Component Video (HDTV) Cable
• 1 Composite Video + Audio Out Cable
• Warranty: One Year

 shipping weight and dimensions: 2 lb, 3-3/4 x 4 x 10" (.9 kg, 95mm x 102mm x 254mm)

-----------------------------------------------------------------------------------

 **NEW   NEW   NEW   NEW   NEW   NEW**

HD Hero Naked complete camera package:  Includes Naked camera kit above, 1 HD Hero battery, 1 Kingston 16GB class 4 card, 1 single USB wall charger (save $16)    

GoPro HD SURF HERO Kit is the world’s only wearable 1080p HD on-board video and still photo camera.  3 HD modes: 1080p, 720p and 960p some with 60 frames per second slow motion option.  Also a 4th wide DVD resolution mode. 

The included adhesive base mounts in seconds.  Or you can install an FCS™ fin plug into the deck of your board and then use the patent pending camera mounting plug to allen key your HD Surf HERO into the FCS™ plug.

What's Included:

• 5 Megapixel HD Surf HERO Camera
• 1 Rechargeable 1100 mAh Lithium-Ion Battery
• 1 Waterproof Quick-Release Housing (180’/60 m)
• 1 3M™ Adhesive Mounting Base
• 1 FCS™ Plug-Compatible Mount
• 1 Quick-Release Buckle
• 1 Leash
• 1 USB Cable (not shown)
• 1 Component Video (HDTV) Cable (not shown)
• 1 Composite Video + Audio Out Cable (not shown)
• Warranty: One Year

 shipping weight and dimensions: 2 lb., 3-3/4 x 4 x 10" (.9 kg, 95mm x 102mm x 254mm)

-------------------------------------------------------

 **NEW   NEW   NEW   NEW   NEW   NEW**

HD Hero Surf complete camera package:  Includes Surf camera kit above, 1 HD Hero battery, 1 Kingston 16GB class 4 card, 1 single USB wall charger (save $16)   

GoPro HD HELMET HERO Kit is the world’s only wearable 1080p HD on-board video and still photo camera.  3 HD modes: 1080p, 720p and 960p some with 60 frames per second slow motion option.  Also a 4th wide DVD resolution mode. 

Included are mounts for attaching the camera to three helmets and two pieces of gear or vehicles, as well as a head strap allowing you to wear the camera like a headlamp. You can also pull this strap over helmets for easy camera sharing between friends. One of the above mentioned helmet mounts is a lace-through strap-mount designed for vented helmets.

What's Included:

• 5 Megapixel HD Helmet HERO Camera
• 1 Rechargeable 1100 mAh Lithium-Ion Battery
• 1 Waterproof Quick-Release Housing (180’/60 m)
• 1 Headlamp-Style Head Strap
• 1 Vented Helmet Strap
• 2 Curved, 3M™ Adhesive Mounts
• 2 Flat, 3M Adhesive Mounts
• 1 Three-Way Pivoting Side Arm Assembly
• 2 Quick-Release Buckles
• 1 USB Cable (not shown)
• 1 Component Video (HDTV) Cable (not shown)
• 1 Composite Video + Audio Out Cable (not shown)
• Warranty: One Year

shipping weight & dimensions: 2lb,3 oz, 3-3/4 x 4 x 10" (.95 kg, 95mm x 102mm x 254mm)

-------------------------------------------------------

 **NEW   NEW   NEW   NEW   NEW   NEW**

HD Hero Helmet complete camera package:  Includes Helmet camera kit above, 1 HD Hero battery, 1 Kingston 16GB class 4 card, 1 single USB wall charger (save $16)   

GoPro HD MOTORSPORTS HERO Kit is the world’s only wearable 1080p HD on-board video and still photo camera.  3 HD modes: 1080p, 720p and 960p some with 60 frames per second slow motion option.  Also a 4th wide DVD resolution mode. 

GoPro’s HD Motorsports HERO is the world’s highest performance 1080p HD on-board video and still photo camera. The HD Motorsports HERO easily mounts to any helmet, motorcycle, ATV, car, plane, jet ski, boat, snowmobile or other vehicle. The camera’s quick-release mounting design makes it easy to re-position the camera around your vehicle for professional quality HD video from several angles.

What's Included:

• 5 Megapixel HD Motorsports HERO Camera
• 1 Rechargeable 1100 mAh Lithium-Ion Battery
• 1 Waterproof Quick-Release Housing (180’/60 m)
• 3 Flat, 3M™ Adhesive Mounts
• 2 Curved, 3M™ Adhesive Mounts
• 2 Quick-Release Buckles
• 1 Vertical Surface “J-Hook” Buckle
• 1 Suction Cup Mount
• 1 Three-Way Pivoting Side Arm Assembly
• 1 USB Cable (not shown)
• 1 Component Video (HDTV) Cable (not shown)
• 1 Composite Video + Audio Out Cable (not shown)
• Warranty: One Year

shipping weight and dimensions: 2lb, 6 oz, 3-3/4 x 4 x 10" (.96 kg, 95mm x 102mm x 254mm)

-------------------------------------------------------

 **NEW   NEW   NEW   NEW   NEW   NEW**

HD Hero Motorsports complete camera package:  Includes Motorsports camera kit above, 1 HD Hero battery, 1 Kingston 16GB class 4 card,1 single USB wall charger(save $16)  
 

16 GB Kingston SD card (class 4) for the HD camera only.  

32 GB Kingston SD card (class 4) for the HD camera only.  

HD HERO Extra Battery  

1100mAh battery for the HD HERO. Anti-vibration "blade on beam" battery connectors so advanced, you'll only find them on laptop batteries and from GoPro.

USB Portable Battery/Charger

Use this USB battery to charge your HD Hero on location.  It's very convenient and fast. Can be velcro'ed to the back of the housing.

5V 7.8Wh Lithium Ion (3.5 oz w/USB cable) (99 grams)
Dimensions:2.4 x 0.4 x 4.2 inches (61mm x 10mm x 107mm).  This battery charges from your computer only (USB cable). Style and brand my vary.
(USB port is NOT available when camera is in the underwater housing.  Replacement housings now available if you want to drill a hole)

Note this is for the HD Hero only.

HD HERO USB ALL -IN-ONE Charger  

Same battery as above: This is all you need:  an external USB Battery, USB AC wall charger and a USB 12v car charger along with a bunch of adapters for use with other USB devices, and a carrying case.  You now have 3 efficient ways now to charge your HD Hero camera. The wall and 12v chargers can also be used to charge the camera directly. Style and brand my vary.
(USB port is NOT available when camera is in the underwater housing.  Replacement housings now available if you want to drill a hole)

Note this is for the HD Hero only.

HD HERO USB double Wall Charger  

Charge up to TWO HD Hero cameras in any wall outlet using this USB wall charger.  Your HD Hero can also record while plugged into and powered by the wall charger.

Note this is for the HD Hero only.  Product may be different than pictured.

HD HERO USB single Wall Charger  

Charge your ONE HD Hero cameras in any wall outlet using this USB wall charger.  Your HD Hero can also record while plugged into and powered by the wall charger.  Style and brand my vary.

Note this is for the HD Hero only.  Product may be different than pictured.

HD HERO Car Charger

Charge your HD HERO's battery in any 12v cigarette lighter using this USB car charger.  Your HD HERO can also record while plugged into and powered by the car charger, making long duration in-car/in-motorcycle filming easy. Style and brand my vary. (USB port is NOT available when camera is in the underwater housing.  Replacement housings now available if you want to drill a hole)

Note this is for the HD Hero only. Product may be different than pictured.

                ** est. early October **

HD Wrist Hero housing

You can p ut the HD Hero on your wrist and film yourself or turn the camera 180 degrees and film the environment.  Great if you don't have the hands available to hold a camera..

Replacement HD HERO Housing

Replacement quick-release housing for all HD Hero GoPro cameras.  Buy this if you damage your underwater housing or of you want to drill a hole in your existing housing for video out or access to USB port.

Go to HD HERO live video out order page

These packages will allow you to get live video out from your HD Hero, either HD video out or standard video out.  We offer both wired and wireless packages.

INTERNATIONAL ORDERS CLICK HERE www.eyeofmine.com/gopro/intl.html

Eye Of Mine Exclusive Roll bar mount - This is an amazing camera mount.  It can be attached to any kind of rod, bar, L-bracket, wood, you name it and the camera can swivel 360 degrees in any direction including up/down.  Fits on anything from 1 inch to 2 inches.  Includes two inserts: 1", 1-1/2", and two different rubber spacer for unusual sized bars.  Also includes the GoPro tripod mount.  Mount itself weighs 7 oz. (200 grams)

See the video on the Eye Of Mine Hero page to see how this mount works. Mount is not rust proof.
shipping weight: 15 oz.           product instructions 4/2010

$39

  
   
2 camera bracket for above roll bar mount - This allows you to have 2 cameras from the above single rollbar mount.  Bracket made from 1/8" (3mm) aluminum.

Requires the above rollbar mount and 1 additional tripod adapter GTRA30.

$15

Extension bracket for Eye Of Mine roll bar mount: This 4-1/2" (114mm) Z shaped bracket extends the camera away from the roll bar mount for instances where you need to get the camera lower (on the top rollbar looking out the windshield) or to get the camera higher (on a lower rollbar to see above the dash, for example). Bracket made from 1/8" (3mm) aluminum.  Camera can also be used on the outside of this bracket in low vibration environments making it 8-1/2" (210 mm) from the roll bar.

Requires the above Eye Of Mine roll bar mount RRLB.  Does not include a tripod adapter (already included in the roll bar mount package above).

$12

 **NEW   NEW   NEW   NEW   NEW   NEW**

Paddle Mount: This mount was originally made for the Discovery Channel for the top fin of a shark, but it could be use for something else. You can very quickly attach and detach in a fraction of a second if needed. It works similar to a vice grip, except there is no adjustment nob. Whatever you squeeze this onto, it will stay locked tight until a lever is pushed.

The paddles are covered with non-stick material (looks like painted sandpaper) for maximum grip. This mount is very front heavy, so you must have a very strong hold on the subject and the subject must be stable or else the mount will rotate off. Can be used vertically or horizontally. Could be used with other lightweight cameras.  Watch video from Shark Week Hosts.

Overall length from end of paddles to camera: 11" (280mm)
Maximum paddle opening: 2-3/4" (70mm)

This is an Eye Of Mine exclusive.

Underwater focus fix bag .  The GoPro HD Hero quite simply, goes out of focus underwater.  Our urethane bag fixes that problem and gives you razor sharp video at 1080p. Also works with stills and all the other video formats.  It slips over the GoPro underwater housing (ironic isn't it?) and has an optically clear acrylic lens.  Don't be stuck on land, take the plunge.... (camera not included...duh)

   More information    product instructions 4/30/2010

As featured on Discovery Channel's Shark week,
Into the Shark Bite   

Underwater flat lens housing:   This new version 2 uses a smaller lens that does not obscure the display or red LED.  We permanently added a flat lens to a GoPro housing to give you razor sharp images and video underwater.  Prototoype pressure tested to 150 feet (45 meters).  Will work on land too.

This is an Eye Of Mine exclusive. 

Note: The ND/polarizing lens we sell will not work with this modified housing.  Want to use colored filters?
Sorry, we can't exchange with your existing factory GoPro housing.          Flat lens housing page

    product instructions 6/15/2010
-------------------------------------------------------

NEW: Novus plastic lens cleaner.  Removes small scratches.   2 fl.oz. (60ml)
 

 **NEW   NEW   NEW   NEW   NEW   NEW**

PROFESSIONAL Flat Lens Housing:  Due to numerous requests from professional divers, we have a new PROFESSIONAL flat lens housing.  Identical to the standard flat lens housing, except we take extra care in making these.  EACH and every professional flat lens housing is pressure tested at 200 feet (61 meters) for 1 hour.   We've added a rubber ring around lens for added protection.

Note: the GoPro housing itself is rated at 180 feet (60 meters), so 200 feet is right on the fringe for this GoPro housing.

GoPro Ride HERO Handlebar mount.  Bicycle seat post and handlebar mount accessory. Fits .75"-1.4" diameter tubing.

GoPro Roll Bar Mount.  Roll bar mount for ATVs, cars, boats. Fits 1.4"-2.5" diameter tubing.

GoPro Suction Cup Mount. Suction Cup for Helmet HERO or Motorsports HERO

GoPro Head Strap.  Goes on your head.  Duh.  Has soft silicone rubber on inside of elastic head strap.

GoPro Chest Mount Harness

• 5 Flat 3M adhesive mounts

• 5 Curved 3M adhesive mounts

• 1 Flat, 3M™ Adhesive Mount
• 1 Curved, 3M™ Adhesive Mount
• 1 Horizontal Surface Quick-Release Buckle
• 1 Vertical Surface J-Hook Buckle
• 1 Thumb Knob with Nut and Bolt
• 1 Pivot Arm Assembly
• 1 Quick-Release/Vibration Plug
• 1 Leash Tether

** will be back in stock on Sept. 10th **

Aluminum Rod extension. This is an aluminum rod that extends from 32" (2'8") (81 cm) to 56" (4'8") (142 cm). Can be used over a crowd of people or 5' underwater. Would be good for watching yourself while you're skiing...this rod uses the tripod adapter for flexibility (included).   Tilt tension is not adjustable or lockable.
Tripod adapter can be removed and rod can be used with other lightweight cameras with a 1/4" bolt. If used underwater, drill a couple holes for water drainage. 
Max load: 12 oz (340 grams).

Item weight: 9 oz (255 grams).

This is an EYE OF MINE EXCLUSIVE.       

Monopod - This is a telescopic mount that extends to 3' and collapses to fit in your pocket.  Great when you can't take alot of extra stuff. Other lightweight cameras can be used too.

item weight: 6 oz (170 grams).

Monopod requires the tripod adapter GTRA30.  Handle color may vary. Monopod is NOT rustproof.  If used underwater, one or two holes should be drilled for water drainage.

Small Camera Handle - This makes the camera a small hand-held unit.  Camera can tilt up/down.  Camera handle is 3-1/2" (89mm) tall.

Requires a tripod adapter GTRA30. 

6" flexible tripod (15 cm)- can be moved into practically any position. Good for tree limbs, fences, etc. Has a removable 1/4" baseplate. Weight: 2 oz (56 grams).

  Color may vary.   Requires GoPro tripod adapter GTRA30. 

10" flexible tripod (25 cm)- can be moved into practically any position. Good for tree limbs, fences, etc. Has a removable 1/4" baseplate.  
item weight: 5 oz (140 grams).

Requires GoPro tripod adapter GTRA30.  Color may vary.

Floatation 2000 XT Turbo: Okay, Okay, these are just kids water wings, but don't you like our fancy name?  Use this in case your suction cup falls off your surfboard.  It has two separate air chambers for added security. Package of two F2000XTT units along with two long double-sided vecro attachments that connect it to the suction cup. Comes in shark repellent orange (or was that a shark attractant orange?).  Could also be used for non-GoPro items.  Nemo pattern also available.

**NEW   NEW   NEW   NEW   NEW   NEW**

Wrist floater: This is a foam wrist floater that is strong enough to hold the camera and suction cup.  Easy to attach to the wrist.  Has an adjustment for sizing.

 
All clamps come with a vertical and horizontal bracket and a 1/4-20 tee-wing nut.  ALL are for STATIONARY use only.  Can be used in water as long as there is no significant water current.
ClampIt Baby clamp: Very small, but very strong.  Solid aluminum.  Could be used for a slightly heavier camera. Max clamp opening: 1"(25mm)

ClampIt Junior clamp: Slightly bigger than Baby, but not as strong.  Plastic and very light  in weight.  Max clamp opening: 1-1/8" (30 mm)

ClampIt Senior clamp: Bigger and stronger than junior, plastic and very light in weight.  L bracket can also be underslung.
Max clamp opening: 1-1/2" (40 mm)

ClampIt Mega clamp:This clamp lives up to it's name.  It has a clamp opening from 1/2" (13mm) to 4" (102mm)!  Very strong. Plastic, 6 oz (170 gram) weight. Could definately use this for a heavier camera. L bracket can also be underslung.

Each clamp requires a tripod adapter GTRA30 (not included)

ClampIt Family Bundle:  Same clamps as shown above.

Mega, senior, junior, baby in one happy family.

Each one requires a tripod adapter GTRA30 (not included)

Tripod Mount for the camera itself.  If you want to use the camera on a tripod WITHOUT the underwater housing, this simple adapter allows you to slide the camera into the adapter.  Camera is held in-place with stiff foam. Aluminum mount has a 1/4" threaded hole at the bottom for a tripod and an opening at the side for USB and A/V cables.  Includes a strong velcrow strap to hold the camera securely for environments with vibration.

Use this mount if you want to run live video out, connect to a TV or connect an external USB battery or simply put it on a tripod.  This is an EYE OF MINE EXCLUSIVE.  Note the camera lens is very vulnerable without the underwater housing.  Handle the camera with care. 

Surf HERO WIDE expansion kit. Oversized Stick-0n Mount, FCS plug, leash for surfing, kayaking, etc.

 **NEW   NEW   NEW   NEW   NEW   NEW**

Reverse GoPro adapter: We've been wanting this one for a long time, so we finally made one ourselves.  It allows you to use a non-GoPro camera or device on a GoPro mount.  How cool is that! 

You can use a GPS, camera, articulated arm, binoculars, 2-way radio, basically anything that has a standard 1/4"-20 bolt (which is 99% of tripod holes out there). Keep in mind, GoPro mounts are designed for a 6 oz. camera so don't go heavier than that in extreme environments or your GoPro mount might break.

This adapter is machined out of solid aluminum. Comes with a removable 1/4-20 bolt to make it a male or female adapter.  Also available in a high-quality Delrin plastic adapter for non-corrosion uses. This mount is an Eye Of Mine exclusive.       
                                                 Aluminum adapter (unpainted):

Available Sept. 10th
Delrin Plastic adapter (black):

Note: Gopro quick release and thumbscrew not included as pictured.

INTERNATIONAL ORDERS CLICK HERE www.eyeofmine.com/gopro/intl.html

HD Hero Camera Leash - great for snorkling, swimming pools. Either attach it to you wrist or simply let the camera float. 

Maybe slightly different than pictured.

GoPro Anti-Fog inserts - Prevent your camera's housing from fogging, even in cold temperatures/humid environments. Great value and performance: includes 3 sets of anti-fog inserts. Each set lasts 4-5 uses and can be dried in an oven (3 minutes) and used again. 

           ** temporarily out of stock **

Neutral Density/polarizer filter (by Ragecam). This little gem needs some explaining. Ever seen a GoPro video where the tires are going backwards (1:57) or where you see RC/helicopter blades (2:00) as if they are standing still?  Wouldn't it be nice to blur them?  All you have to do is cut out some of the light to the lens and you'll get nice realistic blurred propellers, tires, roads, etc. to give you a natural feel.  This filter simply goes between the HD Hero camera lens and the underwater housing lens.  But wait, there's more.  It's also a polarizing filter making the sky deeper blue, removing water reflections and giving more vibrant colors all around.
Example 1  Example 2  product instructions 5/21/2010

Anti-Fog Solution - Put this on the inside of the camera housing lens to reduce fogging.  3.5 fl.oz. (103 ml)

Camera case - Great for holding 1 or more cameras and all your accessories. Exterior  dimensions: 18"L x 13"D x 6"H (45cm x 33cm x 15cm).  Comes with tool holder that attaches inside the top lid.  Also comes with slightly pre-cut foam 2 inch squares.  Lockable, sturdy (not water-proof). 

item weight: 7 lbs. (3 kg)

Think Outside The Box T-Shirt - Do you think outside the box?  Do you want to confuse people who don't?  This shirt is sure to confuse your boxed-in friends.... M, L, XL, XXL pre-shrunk

STANDARD DEFINITION CAMERAS